|
|
| Pro9-H9000C 2.0 |
| NEW Pro9 Sheetmetal Chromoly 9" Housing. 3.50" X .250" Moly Tubes. ARP Housing Studs, Washers and 12 Point Nuts. 1/2" 4130 Moly O Ringed Face Plate and Internal Braces. 1/8" 4130 Moly Housing and Brace. Oil Fill Plug, Drain Plug. Smallest Pumpkin Housing. Built in 3.75" Wide Housing Brace with Internal Brace. Fits 10" Crown Wheel. Better Value Than any Other Moly Housing in the Market. |
SALE: $ 1,950.00 |
|
|
|
| Pro9-W1000C |
| Carbon Fiber Wing Strut Mounting Kit, Includes rod ends, Billet Bumper Mounts, Alloy clevises, Quick release pins, Jam nuts, Stainless steel fasteners. 2 x 1m Lengths of Carbon Tube. 3 BOND GLUE REQUIRED. |
RRP (for kit): $ 295.00 |
|
|
|
| Pro9-WL1008A |
| Weld in Clevis Bung. 1/2" UNF Thread.
Fits Pro9-WL1008 and 1.625" X .083" Chromoly Tube |
RRP (each): $ 18.00 |
|
|
|
| PRO9-DC1000N35T |
| Complete Center Section Includes:
Nodular Iron Case.
Forged Aluminum Tapered Bearing Pinion Support.
Eaton True Trac 35 spline
Choice of 9" Gear.
Chrome moly 1350 Series Yoke.
Professionally Assembled
Timken bearings.
Grade 8 ring gear bolts.
|
FROM: $ 3,300.00 |
|
|
|
| PRO9-DC1000N31T |
| Complete Center Section Includes:
Nodular Iron Case.
Forged Aluminum Tapered Bearing Pinion Support.
Eaton True Trac 31 spline
Choice of 9" Gear.
Chrome moly 1350 Series Yoke.
Professionally Assembled
Timken bearings.
Grade 8 ring gear bolts.
|
FROM: $ 2,670.00 |
|
|
|
| PRO9-DC1000S28T |
| Complete Center Section Includes:
S Series Iron Case.
Forged Aluminum Tapered Bearing Pinion Support.
Eaton True Trac 28 spline
Choice of 9" Gear.
Chrome moly 1350 Series Yoke.
Professionally Assembled
Timken bearings.
Grade 8 ring gear bolts.
|
FROM: $ 2,550.00 |
|
|
|
| PRO9-DC1000S31T |
| Complete Center Section Includes:
S Series Iron Case.
Forged Aluminum Tapered Bearing Pinion Support.
Eaton True Trac 31 spline
Choice of 9" Gear.
Chrome moly 1350 Series Yoke.
Professionally Assembled
Timken bearings.
Grade 8 ring gear bolts.
|
FROM: $ 2,550.00 |
|
|
|
| PRO9-DC1000N28T |
| Complete Center Section Includes:
Nodular Iron Case.
Forged Aluminum Tapered Bearing Pinion Support.
Eaton True Trac 28 spline
Choice of 9" Gear.
Chrome moly 1350 Series Yoke.
Professionally Assembled
Timken bearings.
Grade 8 ring gear bolts.
|
FROM: $ 2,670.00 |
|
|
|
| Pro9-WN1000 |
| 12 Point Wheel Nut Set.
5 ARP 1/2" 12 Point Nuts.
5 ARP Hardened Washers.
5 Billet Alloy 6061T6 Wheel Stepped Washers.
|
RRP: $ 75.00 |
|
|
|
| Pro9-4LK8600 |
| Our base model 4 Link Rear Clip is Supplied with 2 Mandrel bent chassis rails, 4 Chassis Brackets, 4 Diff housing brackets, 9" Housing and Axles 28-31-35 Spline, Strange single Adjustable Shockers and Springs,1 Set of 4 link Bars, 1 Set of Chrome moly Rod Ends, Bolt kit, Track locater, Spreader Tube, Drive Shaft Tube. Unwelded. |
RRP (for kit): $ 4,625.00 |
|
|
|
| Pro9-T5000 |
| Chromoly Tab. .125" Thick, 1/2" Hole. |
RRP: $ 9.00 |
|
|
|
| Pro9-ST1105B |
| Heavy Duty Billet Steel Stabilizer Arms
5" Billet Steel Stabilizer bar arm.
1" Tube Hole with 3/8" Bolt Hole. |
RRP (each): $ 110.00 |
|
|
|
| Pro9-H1036H |
| NEW 9" Inch Heavy Duty Spring Pads. 3.5" 3.25" 3.00" Tubes.
1/2" Grade 8 Cap Screws and Lower Plate. |
RRP (each): $ 130.00 |
|
|
|
| Pro9-J1100 |
| 9" Pinion Centre Line Jig with Axle Lengths.
1/4" Gap For Pinion Centreline.
Check Diff Centre for Spool and Tru Trac Offsets for Correct Axle Lengths. |
RRP: $ 35.00 |
|
|
|
| Pro9-SH3860PTCZ |
| • High performance handling for every generation.
• Shocks offer velocity sensitive deflective disk valving which optimizes control and handling.
•Double Adjustable shocks provide countless tuning options giving you full control over your car’s handling capabilities.
• 100% dyno-tuned for accuracy and quality. |
RRP (pair): $ 1,328.00 |
|
|
|
| Pro9-SH3840BG |
| Big Gun front shocks are specifically valved for high horsepower applications.These shocks fit Holden front ends. LH Torana, HQ -WB Holdens. Lock your Front Down. |
RRP (pair): $ 1,600.00 |
|
|
|
| Pro9-S1005S |
| Alloy adjustable billet shock mount, Made in high grade 6061 T6 alloy, 3/8" bolt holes and 1-1/4" gap for shock mount. Billet Spacers For 1" Shock. 89 mm bolt to bolt. Bolts included. Sold in Pairs.
Dual Mount or Single. |
RRP (for kit): $ 260.00 |
|
|
|
| Pro9-S1006ST |
| Alloy adjustable billet stud shock mount, Made in high grade 6061 T6 alloy, 3/8" bolt holes and 1-1/4" gap for shock mount. Billet Spacers For 1" Shock. 89 mm bolt to bolt. Bolts included. Sold in Pairs.
Dual Mount or Single. |
RRP (for kit): $ 170.00 |
|
|
|
| Pro9-W26113271-BK |
| Aluminum Black Tandem M/C Kit with Bracket and Valve.
7/8" Bore Size. Suits No Booster Applications.
Stainless Steel Brake Pipes.
Adjustable Proportioning Valve. |
RRP (for kit): $ 525.00 |
|
|
Home 
