 |
| Pro9-H1000 |
| This PRO9 housing is the latest innovation of 9" housings. Made from 6061 T6 aluminium and machined to exact specifications. Suit 9" and 9-1/2" crown wheels. Can be used in all types of motorsports, street cars, show cars, hot rods. Try one in your next project.AVAILABLE OPTIONS:-Custom milling patterns,Names,One piece axle,Billet housing. |
RRP: $ 935.00 |
|
 |
| Pro9-H10004LKFL |
| PRO9 4 link, full floating housing, The ultimate race car rear housing, Nothing comes close to this machined housing for straightness, accuracy, and strength. Can be ordered in various lengths, 4 link centers of 17.20" and wider are available,Strange Floater Kit, Shocker mounts, Wheelie bar mounts, Wishbone track locater mounts, 35 & 40 Spline,Brake kit, Brake lines.
Ready to install.
2 YEAR WARRANTY |
RRP: $ 7,495.00 |
|
 |
| Pro9-H10004LK |
| PR09 4 LINK HOUSING,COMPLETE AND READY TO INSTALL,
INCLUDES 4 LINK BRACKETS AND BRACING,LOWER HOUSING TO 4 LINK BRACE,FILLER PLUG,DRAIN PLUG,REAR SHOCK MOUNTS,HOUSING ENDS,3.25" MOLY TUBES,TIG WELDED. |
RRP: $ 3,495.00 |
|
 |
| Pro9-H1000COM |
| PRO9 9 INCH COMMODORE HOUSING,COMPLETE WITH BRACKETS,3" X .250" WALL CHROMOLY AXLE TUBES.BILLET HOUSING ENDS,FITS FACTORY BRAKES,REQUIRES PANHARD ROD ALTERATION,STRONGEST AND STRAIGHTEST HOUSING AVAILABLE.
|
RRP: $ 2,695.00 |
|
 |
| Pro9-H1000LS |
| PR09 ALLOY LEAF SPRING HOUSING TO SUIT ANY LEAF SPRING SUSPENSION CAR OR LIGHT TRUCK.COMES COMPLETLY SET UP AND READY TO INSTALL.
CALL FOR OPTIONS ON AXLES,BRAKES,DIFF CENTER. |
RRP: $ 2,395.00 |
|
 |
| Pro9-H1013 |
| Billet 6061 T6 Alloy Tower To Suit 35" FLANGE TO FLANGE FLOATER HOUSING. |
RRP (each): $ 460.00 |
|
 |
| PRO9-JIG24 |
| PRO9 CHASSIS CONSTRUCTION JIG SETS YOUR REAR END IN THE EXACT POSITION FOR FABRICATION OF YOUR CHASSIS.
THE JIG IS AVAILABLE IN 24" AND 22" SET BACKS FROM LOWER CHASSIS RAILS AND GIVES YOU THE BEST RESULT IN YOUR INSTANT CENTERS AVAILBLE.
WE CAN ALSO SUPPLY YOU WITH A LIST OF INSTANT CENTERS YOU CAN ACHIEVE. |
RRP: $ 595.00 |
|
 |
| Pro9-4LK1020 |
| ASSEMBLED PRO9 4 LINK BRACKET,INCLUDES UPPER AND LOWER DOUBLERS AND SHOCKER MOUNT,WELDED AND PLATED. |
RRP (each): $ 320.00 |
|
 |
| Pro9-WL1012 |
| PRO9 WISHBONE TRAC LOCATER MOUNT, 2 STUDS,2 WASHERS,2 12 POINT NUTS,1/2"UNC TOP BOLT, MOUNTING TAB WITH BRAKE LINE HOLDER FOR T PIECE -3 FITTING |
RRP (for kit): $ 79.00 |
|
 |
| Pro9-H1012 |
| LIGHT WEIGHT PRO9 TOWER 3" X .250" MOLY TUBE |
|
|
 |
| Pro9-H1011 |
| Heavy duty Pro9 housing towers for 3.00", 3.25", 3.50" x .250" wall chromoly tube. These are bored to your tubing size and press fitted and tig welded for the ultimate in strength.
|
RRP (each): $ 275.00 |
|
 |
| Pro9-H1009 |
| PRO9 -8 ALLOY HOUSING DRAIN PLUG WITH O RING |
RRP (each): $ 11.00 |
|
 |
| Pro9-H1001 |
| ARP High Tensile 3/8" Studs for diff center mounting. Includes 12 point nuts and flat washers.
|
RRP: $ 65.00 |
|
 |
| Pro9-H1002 |
| High tensile 1/2" x 7/16" grip Tower stud with 12 point nuts and flat washers.
|
RRP: $ 245.00 |
|
 |
| ADJUSTABLE SHOCK MOUNT |
| ADJUSTABLE SHOCK MOUNT .250" THICK CHROMOLY PLATE DRILLED AND TAPPED TO 3/8" UNF . MILLED TO FIT BETWEEN 4 LINK PLATES. |
RRP: $ 13.00 |
|
 |
| Pro9-H1017 |
| 1/4" BSP BRASS HOUSING VENT |
RRP (each): $ 4.50 |
|
 |
| Pro9-H1010 |
| No more damaged plugs with this hex design filler plug. Eliminates damage caused from removing tight plugs with multi grips, Comes with a rubber O-Ring seal.
|
RRP (each): $ 23.00 |
|
 |
| Pro9-WB1013 |
| LOWER WHEELIE BAR MOUNT FOR 1-1/2" TUBE |
RRP (each): $ 13.00 |
|
 |
| PRO9 HOUSING BRACE |
| 4 LINK BRACE AND HOUSING STIFFENER FOR PRO9 HOUSING. LOWER DIFF MOUNT. 2 1-1/2"X.083 X 12" MOLY TUBE 2 TUBE ADAPTORS WITH 1/2"UNF THREAD. |
RRP (for kit): $ 155.00 |
|
 |
| Pro9-300x250MT |
| 3.00" x .250" WALL CHROMOLY DIFF TUBE
|
RRP (per foot): $ 55.00 |
|
Home
