|
|
Pro9-W1010B |
Pro9 Billet Wing or Parachute Mount. 3/16" bolt holes. Fits 3/16" Rod End. |
RRP (each): $ 28.00 |
|
|
Pro9-HQ1000 |
Coil Over to HQ Mounting Kit. Mounts in Original Spring location on the Body and comes with Adjustable lower Housing Mounts.
Our kit is Available to use any Coil Over Shocker but we reccomend using the Finest Koni Double Adjustable Shocker for the best Shock Control. |
RRP (for kit): $ 1,695.00 |
|
|
Pro9-H1027BR |
Holden Large Bearing Housing Ends.
This end uses 3.150" OD Bearing .
Fits Commodore brakes to 35 or 40 Spline Axles
Can be used on HQ and Torana Brake Systems.
Internal Axle Seal.
|
RRP (each): $ 95.00 |
|
|
Pro9-HQ6000A |
HQ-WB Rear Adjustable Control Arms. 4130 Chrome Moly Construction, Available with Chrome Moly rod Ends or Nolathane Rod Ends. |
RRP (for kit): $ 895.00 |
|
|
Pro9-HQ6000L |
HQ-WB Rear Lower Control Arms. 4130 Chrome Moly Construction, Available with Chrome Moly rod Ends or Nolathane Rod Ends. |
RRP (for kit): $ 450.00 |
|
|
Pro9-HQ6000U |
HQ-WB Rear Upper Control Arms. 4130 Chrome Moly Construction, Available with Chrome Moly rod Ends or Nolathane Rod Ends. |
RRP (for kit): $ 550.00 |
|
|
Pro9-LC6000L |
LC-LJ Rear Lower Control Arms. 4130 Chrome Moly Construction, Available with Chrome Moly rod Ends or Nolathane Rod Ends. |
RRP (for kit): $ 595.00 |
|
|
Pro9-LC6000A |
LC-LJ Rear Upper and Lower Control Arms. 4130 Chrome Moly Construction, Available with Chrome Moly rod Ends or Nolathane Rod Ends. |
RRP (for kit): $ 995.00 |
|
|
Pro9-LC6000U |
LC-LJ Rear Upper Control Arms. 4130 Chrome Moly Construction, Available with Chrome Moly rod Ends or Nolathane Rod Ends. |
RRP (for kit): $ 550.00 |
|
|
Pro9-LH5000B |
LH Torana Bracket Kit. Upper and Lower Including Bushes, Bolts and Tab. |
RRP (for kit): $ 375.00 |
|
|
Pro9-LH6000A |
LH-LX Rear Adjustable Control Arms. 4130 Chrome Moly Construction, Available with Chrome Moly rod Ends or Nolathane Rod Ends.
|
RRP (for kit): $ 895.00 |
|
|
Pro9-LH6000L |
LH-LX Rear Lower Control Arms. 4130 Chrome Moly Construction, Available with Chrome Moly rod Ends or Nolathane Rod Ends. |
RRP (for kit): $ 450.00 |
|
|
Pro9-LH6000U |
LH-LX Rear Upper Control Arms. 4130 Chrome Moly Construction, Available with Chrome Moly rod Ends or Nolathane Rod Ends. |
RRP (for kit): $ 550.00 |
|
|
Pro9-FE5000 |
LH-LX Tubular Front End. 4130 Chromoly Tube K Frame.
4130 Chromoly Tube Upper and Lower Arms,
Standard Upper and Lower ball Joints.
HQ Stub Axles. Wilwood Brake Kit.
AFCO Double Adjustable Shocks and Chrome Springs.
Lower Engine Mounting,
65 KGs Lighter.
6 Degrees of Castor.
Big and Small Block Engine Plates Available.
The Ultimate LH-LX Torana Front End.
OFF ROAD USE ONLY. |
RRP: $ 7,795.00 |
|
|
PRO9-DC-N1910 |
Load Bolt Assembly for Ultra and HD Pro Cases. |
FROM: $ 100.00 |
|
|
Pro9-C1000 |
Mandrel Bent Chassis Rail 4 Link. This Rail Design is Set up for Optimum Component Clearances and 4 Link Length.
|
RRP (each): $ 320.00 |
|
|
Pro9-RE-FBE12R |
Nolathane Right Hand Rod End.
5/8" Inside Diameter.
3/4" Unf Thread
1.69" Wide (43mm) |
RRP (each): $ 49.50 |
|
|
Pro9-P3000-7 |
Single Parachute Pack mount Frame. Billet Alloy 6061 T6 . 7" x 7" Frame with Mounting Tabs. Suits Most 7" x 7" Chutes. Frame Only. |
RRP (each): $ 168.00 |
|
|
Pro9-P3000-9 |
Single Parachute Pack mount Frame. Billet Alloy 6061 T6 . 9" x 9" Frame with Mounting Tabs. Suits Most 9" x 9" Chutes. Frame Only. |
RRP (each): $ 177.00 |
|